- Type of sensor cable: Coaxial
- Type of material used for cover: Braided and heat resistant
- Frequency of the signal carried through the cable: Radio frequency(RF) signal
- Length of the cable: 180mm (customisable as per customer request)
- Connector on the top: Straight
- Connector on the bottom: Straight
This coaxial cable is used to transmit the signal from a capacitive sensor fitted at the lower parts of the head, to a signal amplifier fitted above. The capacitive sensor gives out a very weak signal and this signal must be carried to the amplifier with minimal signal loss so that the most accurate information is relayed back. The amplifier then amplifies this signal and makes it usable for the feedback.
The machine CNC system decides the height of the laser head above the cutting material based on this signal. Thus, this signal is very important for the proper cutting of material. Coaxial cables have much lesser loss in information that normal cables. Therefore, we use coaxial cable as sensor cable in lasers and similar equipment.
As the temperature near the cutting surface is very high, the cable must have ample protection fro heat. This sensor cable is covered with a heat resistant material which is burn proof at high temperatures experienced at the cutting surface.
We also provide customisation options for size. Size is an important parameter for coaxial cables. The longer the size, the more is the signal loss due to material resistance. You can contact our WhatsApp number given on our website for customisation offer and bulk discounts.
